Skip to content
FreeToolsNexus
Converters & Calculators

Gift Wrapping Paper Calculator

Enter a gift's size to get the exact piece of wrapping paper to cut, how many gifts a roll wraps, how many rolls to buy for a pile of presents, and the ribbon you need.

Everything is calculated in your browser. Results update as you type. Sizes are approximate; wrap a test piece before cutting expensive paper.

Seam, tuck, pattern, waste and bow settings

Pattern allowance adds a percentage to the cut length so a printed design can line up (try 10 for patterned paper, 0 for plain). The waste buffer applies to totals for several gifts. This calculator uses the standard wrap only, not the diagonal wrap.

Wrapping more than one size? (boxes only)

Use it like an app on your phone

Open this page in your phone's browser and use the browser menu's "Add to Home Screen" option to keep a shortcut. It opens in the browser as normal and still needs a connection to load; this site does not install anything or work offline.

What is the gift wrapping paper calculator?

The gift wrapping paper calculator works out how big a piece of paper each gift needs, and how much paper to buy for all of them. It handles boxes, cubes, cylinders such as bottles and tubes, books, envelopes, soft items and irregular gifts treated as a box. Enter the size in inches, centimeters or millimeters, choose a roll, sheet or any paper, and the result updates as you type. It also estimates ribbon, shows a labeled cut diagram and can print a cut guide.

How it works

For a box, the paper needs a girth of 2 × (width + height) plus the seam overlap and both tucks, and a length along the gift of length + height plus both tucks. The paper can run either way on the roll, so the tool tries both and picks the one that fits the roll width with the shorter cut, then rounds up to 0.5 cm or 1/4 inch. A cylinder uses π × diameter for the girth. Totals add a waste buffer and round rolls up. It uses the standard wrap, not the diagonal wrap.

Worked example

A box measuring 30 × 20 × 10 cm with a 2 cm seam and 1 cm tucks has a girth of 2 × (20 + 10) + 2 + 2 = 64 cm and an along length of 30 + 10 + 2 = 42 cm. On a 70 cm roll the piece is 64 cm across and 42 cm long, so a 2 m roll wraps four of them. Three such gifts with a 10% waste buffer need 138.6 cm, which is one roll with about 61 cm left. A ribbon band plus a 40 cm bow is 100 cm.

How to measure a gift

Use a flexible tape measure and measure the gift as it will be wrapped, with the lid on and any sleeve in place. Write down three numbers: the length (the longest side), the width (the other side of the top) and the height (how tall it stands). For a cylinder, measure the diameter at its widest point and the height.

How to measure a box A box drawn in perspective with its length along the front bottom edge, its width along the side going back, and its height on the left edge. Length (L) Width (W) Height (H)
Length is the longest edge, width the other edge of the top, and height how tall the gift stands.

Quick reference: paper size for common gifts

Pieces assume a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks, fitted to a 70 cm or 30 in wide roll. The first number runs across the roll width and the second runs along the roll. Gift sizes are approximate.

Gift Typical size Paper piece (cm) Paper piece (inches) Ribbon band + bow
Gift card in envelope 17 × 10 × 0.5 cm
(6 3/4 × 3 7/8 × 1/4 in)
25 × 19.5 cm 10 1/2 × 8 in 61 cm (24 1/2 in)
Jewelry box 8 × 8 × 4 cm
(3 1/8 × 3 1/8 × 1 5/8 in)
28 × 14 cm 11 1/2 × 5 3/4 in 64 cm (25 1/2 in)
Perfume box 12 × 8 × 5 cm
(4 3/4 × 3 1/8 × 2 in)
30 × 19 cm 12 1/4 × 7 3/4 in 66 cm (26 1/4 in)
Phone box 17 × 9 × 6 cm
(6 3/4 × 3 1/2 × 2 3/8 in)
34 × 25 cm 14 × 10 1/4 in 70 cm (28 in)
Hardback book 24 × 16 × 3 cm
(9 1/2 × 6 1/4 × 1 1/8 in)
42 × 29 cm 17 × 11 3/4 in 78 cm (31 in)
Mug 8.5 cm across and 10 cm tall
(3 3/8 in across and 3 7/8 in tall)
31 × 20.5 cm 12 3/4 × 8 1/2 in 67 cm (26 3/4 in)
Cereal box 30 × 20 × 7 cm
(11 3/4 × 7 7/8 × 2 3/4 in)
58 × 39 cm 23 1/2 × 15 3/4 in 94 cm (37 1/2 in)
Shirt box 38 × 28 × 7 cm
(15 × 11 × 2 3/4 in)
47 × 74 cm 29 3/4 × 18 3/4 in 110 cm (43 3/4 in)
Shoe box 33 × 20 × 12 cm
(13 × 7 7/8 × 4 3/4 in)
68 × 47 cm 27 1/4 × 18 3/4 in 104 cm (41 1/4 in)
Wine bottle 7.5 cm across and 30 cm tall
(3 in across and 11 3/4 in tall)
39.5 × 28 cm 16 × 11 1/2 in 64 cm (25 1/2 in)
Toy box 30 × 25 × 15 cm
(11 3/4 × 9 7/8 × 5 7/8 in)
47 × 84 cm 18 3/4 × 33 1/2 in 120 cm (47 1/2 in)
Laptop box 42 × 30 × 8 cm
(16 1/2 × 11 3/4 × 3 1/8 in)
52 × 80 cm 20 3/4 × 32 in 116 cm (46 in)

Roll and sheet sizes by region

Retail sizes vary by brand, so check the label on your roll. These are the sizes you will meet most often.

RegionTypical widthsTypical lengths
United States and Canada30 in (76 cm) is the standard; 24 in and 36 in also appear8 ft to 100 ft, with 25 ft and 40 ft common for holiday rolls
United Kingdom and Ireland70 cm for most supermarket rolls; 50 cm for budget rolls2 m to 5 m; jumbo rolls up to 10 m or more
Europe70 cm is the most common; 50 cm and 35 cm also appear2 m to 5 m for gift rolls, 50 m or more for trade rolls
Australia and New Zealand50 cm to 70 cm2 m to 5 m for retail rolls

Roll presets in the calculator: 50 cm × 3 m, 70 cm × 2 m, 76 cm × 5 m, 30 in × 8 ft, 30 in × 10 ft, 30 in × 12.5 ft, 30 in × 25 ft. Flat sheets: 50 × 70 cm, 20 × 28 inches, A1 and A2.

How to wrap a box, step by step

  1. Measure the box and enter its length, width and height above. Note the piece to cut and which way the paper runs.
  2. Mark the piece on the back of the paper with a pencil and ruler, and cut with long, steady strokes. Rounded-up sizes leave a small safety margin.
  3. Place the box upside down on the paper, centered, so the seam ends up on the bottom.
  4. Pull one long edge over the box and tape it, then fold the other edge under by about 1 cm (0.5 in) and tape it along the middle of the bottom.
  5. At each end, fold the sides in to make flaps, crease the top and bottom triangles, and bring the lower flap up to meet the upper one. Secure with double-sided tape.
  6. Finish with ribbon, using the ribbon estimate for a band or a cross wrap plus the bow.

Wrapping bottles, cylinders and soft items

A bottle or tube is wrapped as a cylinder: the paper goes once around it and is gathered at both ends, so it needs π × diameter plus the seam for the girth, and height plus diameter plus tucks along its length. A 750 ml wine bottle needs about 39.5 × 28 cm. Soft items such as cushions and clothes, and awkward gifts such as baskets, are measured as the smallest box they fit in, which gives a generous estimate.

How many rolls for a pile of presents?

Using an average 30 × 25 × 15 cm (about 12 × 10 × 6 in) present and a 10% waste buffer, this is how many rolls the planner suggests. Rolls are counted by length, which is safer than dividing areas because pieces are cut one after another.

Presents70 cm × 2 m rolls30 in × 25 ft rolls
531
1052
20103
30144
50247

Tips to avoid waste

  • Sort gifts into small, medium and large groups, and cut the largest pieces first so offcuts can wrap the small ones.
  • Check both paper directions. The calculator picks the one with the shorter cut, but you can use the other when the print runs the right way.
  • Use the pattern allowance only for printed paper that has to line up, and leave it at 0 for plain or kraft paper.
  • Wrap a gift-sized scrap of newspaper first to confirm the piece before cutting good paper.
  • Keep offcuts for small boxes, gift tags and card envelopes.

Sources and accuracy

The calculator uses plain geometry: the girth of the box plus a seam overlap and tucks, and the length plus the height plus tucks. Defaults of a 2 cm seam, 1 cm tucks, a 10% waste buffer and a 40 cm bow are common wrapping practice rather than an official standard. Roll and gift sizes are typical retail sizes, so treat every result as a planning estimate and check it against your own gift and paper.

Wrapping paper by gift and occasion

Related tools: unit converter, cake pan converter, cake servings calculator and cups to grams converter.

Frequently asked questions

How much wrapping paper do I need for one gift?

Measure the gift's length, width and height, then add allowances. The paper must go around the box once plus a seam overlap, and cover the length plus the height for the end folds. A 30 × 20 × 10 cm box needs about 64 × 42 cm. Enter your own size above and the calculator does this instantly.

How do you calculate wrapping paper for a box?

Paper width around the box is 2 × (width + height) plus a seam overlap of about 2 cm and a tuck of about 1 cm at each end. The other dimension is the length plus the height plus the tucks. Round both up slightly, and make sure one of them fits your roll width.

How big a piece of wrapping paper do I need for a shoebox?

A typical adult shoebox of 33 × 20 × 12 cm needs a piece of about 68 × 47 cm, which is 27 1/4 × 18 3/4 inches with the inch defaults. It fits a 50 cm roll with the 47 cm side across the roll width. Boot boxes and children's boxes differ, so always measure your own.

How much paper does a wine bottle or cylinder need?

A cylinder uses π × diameter plus the seam and tucks to go around, and height plus diameter plus tucks along its length. A 750 ml wine bottle about 7.5 cm across and 30 cm tall needs roughly 39.5 × 28 cm. Gather the paper at both ends and tie it with ribbon.

How much overlap should the seam have?

The default seam overlap is 2 cm (1 inch), which is enough to hold double-sided tape without looking bulky. Thin or slippery paper may need a little more, and neat gift wrappers sometimes use less. You can change the seam, the tuck per end, the pattern allowance and the waste buffer in the settings section above.

What size are standard wrapping paper rolls?

Common retail rolls are 70 cm wide by 2 m long in the UK and Europe, 50 cm by 3 m for budget rolls, and 30 inches wide in the United States, in lengths from 8 to 25 feet. Check the label on your roll, because sizes vary by brand, and pick the matching preset or enter a custom roll.

How many gifts can one roll of wrapping paper wrap?

Divide the roll length by the piece length along the roll. A 30 × 20 × 10 cm box needs a piece 42 cm long on a 70 cm roll, so a 2 m roll wraps four of them. Gifts that are smaller or flatter wrap more per roll. The calculator shows the number for your gift and roll.

How many rolls of wrapping paper do I need for Christmas?

It depends on the gift sizes. Twenty average presents of 30 × 25 × 15 cm need about 18.5 m with a 10% waste buffer, which is ten 70 cm × 2 m rolls or three 30 inch × 25 ft rolls. Use the extra gift sizes section to add small, medium and large groups for a closer total.

What is the waste buffer for?

The waste buffer adds a percentage, 10% by default, to the total paper for several gifts. It covers crooked cuts, torn corners and offcuts too short to reuse. A confident wrapper with plain paper might use 5%, and a beginner or someone using expensive paper might choose 15% or more.

What does the pattern allowance do?

Patterned or striped paper often has to line up across the seam or sit the right way up, which wastes a little paper. The pattern allowance adds a percentage to the cut length so you do not run short. It is off by default for plain paper; try 10 for a design with a repeating pattern.

What if my gift is too wide for the roll?

The calculator tells you the minimum roll width needed and suggests two overlapping pieces. Turn the paper both ways first, since either direction may fit. If it truly cannot fit, use a wider roll, cover the top and bottom halves separately, or hide the join under a wide ribbon or a strip of matching paper.

How much ribbon do I need for a gift?

A single band around the box needs 2 × (width + height) of ribbon, and a cross wrap needs 2 × length + 2 × width + 4 × height. Add 40 cm (16 inches) for the bow, which you can change. A 30 × 20 × 10 cm box takes 100 cm for a band with a bow, or 180 cm for a cross.

Does the calculator include the diagonal wrap?

No. It calculates the standard wrap, where the paper goes straight around the box and the ends are folded. The diagonal wrap, with the box turned 45 degrees on a square of paper, uses a different geometry and often more paper. If you plan to use it, add generous extra and test with scrap first.

How do I measure odd shapes, soft items or baskets?

Measure the smallest box the gift fits inside, using the longest length, the widest width and the tallest height, and choose the irregular or soft item shape. Compress soft items such as cushions and clothes the way you will wrap them. The result is a generous estimate, which is what you want for awkward gifts.

Can I use flat sheets instead of a roll?

Yes. Choose flat sheets and pick a size such as 50 × 70 cm, 20 × 28 inches, A1 or A2. The calculator tries the piece both ways on the sheet, counts how many pieces fit in a simple grid, and tells you how many sheets to buy with the waste buffer included.

Should I measure in centimeters, inches or millimeters?

Use whichever you have on your tape measure. The calculator works in your chosen unit, accepts fractions such as 7 1/2, and shows results in that unit plus an approximate conversion. It rounds each cut up to 0.5 cm in metric or 1/4 inch in inches, so the piece is never cut short.

Is my data uploaded anywhere?

No. All calculations run in your browser and nothing you type is sent to a server. The page only remembers your last unit and roll size on your own device, using local storage, so it opens the way you left it. Clear your browser data to remove that preference at any time.

How accurate is the wrapping paper estimate?

It is a planning estimate based on standard allowances, not a guarantee. Thick gifts, stiff paper, bulging lids and loose folding all change the result by a centimeter or two. Wrap a test piece or one scrap sheet first, and adjust the seam and tuck settings if your technique uses more or less paper.