Skip to content
FreeToolsNexus
Converters & Calculators

Wrapping Paper for a Laptop

A laptop box of about 42 × 30 × 8 cm (16 1/2 × 11 3/4 × 3 1/8 in) needs a piece of wrapping paper about 52 × 80 cm (20 3/4 × 32 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

Everything is calculated in your browser. Results update as you type. Sizes are approximate; wrap a test piece before cutting expensive paper.

Seam, tuck, pattern, waste and bow settings

Pattern allowance adds a percentage to the cut length so a printed design can line up (try 10 for patterned paper, 0 for plain). The waste buffer applies to totals for several gifts. This calculator uses the standard wrap only, not the diagonal wrap.

Wrapping more than one size? (boxes only)

Use it like an app on your phone

Open this page in your phone's browser and use the browser menu's "Add to Home Screen" option to keep a shortcut. It opens in the browser as normal and still needs a connection to load; this site does not install anything or work offline.

Laptop boxes are large and flat, and usually come with a branded sleeve that is hard to cover. This page assumes a box of about 42 × 30 × 8 cm, which fits many 14 to 15 inch models.

Quick reference: laptop box

MeasureMetricInches
Assumed gift size42 × 30 × 8 cm16 1/2 × 11 3/4 × 3 1/8 in
Paper to cut (across × along the roll)52 × 80 cm20 3/4 × 32 in
Ribbon: band with bow116 cm46 in
Ribbon: cross wrap with bow216 cm85 1/2 in

Pieces use a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks, fitted to a 70 cm or 30 in roll. Change any setting in the calculator above.

Tips for this gift

If the box has a printed sleeve, wrap over the sleeve rather than removing it; the sleeve holds the box together and you avoid a loose lid.

A laptop is heavy and expensive, so use double-sided tape on the seam and a second strip on the ends. A taut wrap stays neat when the gift is carried.

Frequently asked questions

How much wrapping paper do I need for a laptop box?

A laptop box of about 42 × 30 × 8 cm (16 1/2 × 11 3/4 × 3 1/8 in) needs a piece of wrapping paper about 52 × 80 cm (20 3/4 × 32 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

Will a standard roll cover a laptop box?

Often yes. A 42 × 30 × 8 cm box needs a piece about 52 × 80 cm, so the roll must be at least 52 cm wide. A 70 cm roll fits it comfortably, while a 50 cm roll is too narrow by 2 cm. Measure your own box and check the calculator for the exact fit.

How do you calculate wrapping paper for a box?

Paper width around the box is 2 × (width + height) plus a seam overlap of about 2 cm and a tuck of about 1 cm at each end. The other dimension is the length plus the height plus the tucks. Round both up slightly, and make sure one of them fits your roll width.

What is the waste buffer for?

The waste buffer adds a percentage, 10% by default, to the total paper for several gifts. It covers crooked cuts, torn corners and offcuts too short to reuse. A confident wrapper with plain paper might use 5%, and a beginner or someone using expensive paper might choose 15% or more.

What if my gift is too wide for the roll?

The calculator tells you the minimum roll width needed and suggests two overlapping pieces. Turn the paper both ways first, since either direction may fit. If it truly cannot fit, use a wider roll, cover the top and bottom halves separately, or hide the join under a wide ribbon or a strip of matching paper.

How much ribbon do I need for a gift?

A single band around the box needs 2 × (width + height) of ribbon, and a cross wrap needs 2 × length + 2 × width + 4 × height. Add 40 cm (16 inches) for the bow, which you can change. A 30 × 20 × 10 cm box takes 100 cm for a band with a bow, or 180 cm for a cross.

Related guides and tools