Skip to content
FreeToolsNexus
Converters & Calculators

Wrapping Paper for a Wine bottle

A wine bottle of about 7.5 cm across and 30 cm tall (3 in across and 11 3/4 in tall) needs a piece of wrapping paper about 39.5 × 28 cm (16 × 11 1/2 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

Everything is calculated in your browser. Results update as you type. Sizes are approximate; wrap a test piece before cutting expensive paper.

Seam, tuck, pattern, waste and bow settings

Pattern allowance adds a percentage to the cut length so a printed design can line up (try 10 for patterned paper, 0 for plain). The waste buffer applies to totals for several gifts. This calculator uses the standard wrap only, not the diagonal wrap.

Wrapping more than one size? (boxes only)

Use it like an app on your phone

Open this page in your phone's browser and use the browser menu's "Add to Home Screen" option to keep a shortcut. It opens in the browser as normal and still needs a connection to load; this site does not install anything or work offline.

A wine bottle is a tall cylinder, so it uses a different formula from a box: the paper circles the bottle once and the ends are gathered at the top and base. The numbers assume a standard 750 ml bottle about 30 cm tall and 7.5 cm wide.

Quick reference: wine bottle

MeasureMetricInches
Assumed gift size7.5 cm across and 30 cm tall3 in across and 11 3/4 in tall
Paper to cut (across × along the roll)39.5 × 28 cm16 × 11 1/2 in
Ribbon: band with bow64 cm25 1/2 in

Pieces use a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks, fitted to a 70 cm or 30 in roll. Change any setting in the calculator above.

Tips for this gift

Stand the bottle on the paper's edge and roll it, so the seam falls along the back instead of the front. The ends then gather to a point that you can tie with ribbon.

Champagne bottles are wider and have a thicker neck, and magnums are much larger. Measure the widest part with a tape and use that as the diameter.

Frequently asked questions

How much wrapping paper do I need for a wine bottle?

A wine bottle of about 7.5 cm across and 30 cm tall (3 in across and 11 3/4 in tall) needs a piece of wrapping paper about 39.5 × 28 cm (16 × 11 1/2 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

How long should the paper be for a bottle?

Paper that runs along the bottle needs to be about the bottle height plus its diameter plus a tuck margin, around 40 cm for a wine bottle. The other side needs to wrap around, roughly 28 cm. A 50 cm roll therefore easily wraps a bottle.

How do you calculate wrapping paper for a box?

Paper width around the box is 2 × (width + height) plus a seam overlap of about 2 cm and a tuck of about 1 cm at each end. The other dimension is the length plus the height plus the tucks. Round both up slightly, and make sure one of them fits your roll width.

What is the waste buffer for?

The waste buffer adds a percentage, 10% by default, to the total paper for several gifts. It covers crooked cuts, torn corners and offcuts too short to reuse. A confident wrapper with plain paper might use 5%, and a beginner or someone using expensive paper might choose 15% or more.

What if my gift is too wide for the roll?

The calculator tells you the minimum roll width needed and suggests two overlapping pieces. Turn the paper both ways first, since either direction may fit. If it truly cannot fit, use a wider roll, cover the top and bottom halves separately, or hide the join under a wide ribbon or a strip of matching paper.

How much ribbon do I need for a gift?

A single band around the box needs 2 × (width + height) of ribbon, and a cross wrap needs 2 × length + 2 × width + 4 × height. Add 40 cm (16 inches) for the bow, which you can change. A 30 × 20 × 10 cm box takes 100 cm for a band with a bow, or 180 cm for a cross.

Related guides and tools