Skip to content
FreeToolsNexus
Converters & Calculators

Wedding Wrapping Paper Calculator

3 Wedding gifts of about 30 × 25 × 15 cm (11 3/4 × 9 7/8 × 5 7/8 in) need roughly 2.8 m (9.2 ft) of paper with a 10% waste buffer. That is 2 rolls of 70 cm × 2 m paper, or 1 roll of 30 in × 25 ft paper.

Everything is calculated in your browser. Results update as you type. Sizes are approximate; wrap a test piece before cutting expensive paper.

Seam, tuck, pattern, waste and bow settings

Pattern allowance adds a percentage to the cut length so a printed design can line up (try 10 for patterned paper, 0 for plain). The waste buffer applies to totals for several gifts. This calculator uses the standard wrap only, not the diagonal wrap.

Wrapping more than one size? (boxes only)

Use it like an app on your phone

Open this page in your phone's browser and use the browser menu's "Add to Home Screen" option to keep a shortcut. It opens in the browser as normal and still needs a connection to load; this site does not install anything or work offline.

Wedding presents are often larger and more fragile, such as kitchenware, bedding and framed art. This page estimates how much paper a few medium to large gifts need, with extra allowance for a neat finish.

Quick reference: toy box

MeasureMetricInches
Assumed gift size30 × 25 × 15 cm11 3/4 × 9 7/8 × 5 7/8 in
Paper to cut (across × along the roll)47 × 84 cm18 3/4 × 33 1/2 in
Ribbon: band with bow120 cm47 1/2 in
Ribbon: cross wrap with bow210 cm83 in

Pieces use a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks, fitted to a 70 cm or 30 in roll. Change any setting in the calculator above.

Tips for this gift

Choose a plain or subtly patterned paper for wedding gifts, which hides small tape marks, and always use double-sided tape on the seam so the wrap looks seamless.

Large kitchen appliance boxes are often wider than a standard roll. Measure the box before you buy, and use the roll width suggestion in the calculator to decide.

Frequently asked questions

How much wrapping paper do I need for Wedding gifts?

3 Wedding gifts of about 30 × 25 × 15 cm (11 3/4 × 9 7/8 × 5 7/8 in) need roughly 2.8 m (9.2 ft) of paper with a 10% waste buffer. That is 2 rolls of 70 cm × 2 m paper, or 1 roll of 30 in × 25 ft paper.

How much paper do I need for a large wedding gift?

A box of 40 × 30 × 20 cm needs a piece of about 62 × 104 cm. That fits a 70 cm roll with 8 cm to spare, but a 50 cm roll is too narrow. A box 10 cm taller would not fit a 70 cm roll at all, so measure it with its packaging in place.

How do you calculate wrapping paper for a box?

Paper width around the box is 2 × (width + height) plus a seam overlap of about 2 cm and a tuck of about 1 cm at each end. The other dimension is the length plus the height plus the tucks. Round both up slightly, and make sure one of them fits your roll width.

What is the waste buffer for?

The waste buffer adds a percentage, 10% by default, to the total paper for several gifts. It covers crooked cuts, torn corners and offcuts too short to reuse. A confident wrapper with plain paper might use 5%, and a beginner or someone using expensive paper might choose 15% or more.

What if my gift is too wide for the roll?

The calculator tells you the minimum roll width needed and suggests two overlapping pieces. Turn the paper both ways first, since either direction may fit. If it truly cannot fit, use a wider roll, cover the top and bottom halves separately, or hide the join under a wide ribbon or a strip of matching paper.

How much ribbon do I need for a gift?

A single band around the box needs 2 × (width + height) of ribbon, and a cross wrap needs 2 × length + 2 × width + 4 × height. Add 40 cm (16 inches) for the bow, which you can change. A 30 × 20 × 10 cm box takes 100 cm for a band with a bow, or 180 cm for a cross.

Related guides and tools