Skip to content
FreeToolsNexus
Converters & Calculators

Wrapping Paper for a Cylinder or tube

A cylinder gift of about 10 cm across and 30 cm tall (3 7/8 in across and 11 3/4 in tall) needs a piece of wrapping paper about 42 × 35.5 cm (16 3/4 × 14 1/2 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

Everything is calculated in your browser. Results update as you type. Sizes are approximate; wrap a test piece before cutting expensive paper.

Seam, tuck, pattern, waste and bow settings

Pattern allowance adds a percentage to the cut length so a printed design can line up (try 10 for patterned paper, 0 for plain). The waste buffer applies to totals for several gifts. This calculator uses the standard wrap only, not the diagonal wrap.

Wrapping more than one size? (boxes only)

Use it like an app on your phone

Open this page in your phone's browser and use the browser menu's "Add to Home Screen" option to keep a shortcut. It opens in the browser as normal and still needs a connection to load; this site does not install anything or work offline.

Round gifts such as tubes of tea, candle jars and posters in a mailing tube all use the cylinder formula. The default here is a tube 10 cm across and 30 cm tall, and you can change it to match yours.

Quick reference: tube gift

MeasureMetricInches
Assumed gift size10 cm across and 30 cm tall3 7/8 in across and 11 3/4 in tall
Paper to cut (across × along the roll)42 × 35.5 cm16 3/4 × 14 1/2 in
Ribbon: band with bow71.5 cm28 1/2 in

Pieces use a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks, fitted to a 70 cm or 30 in roll. Change any setting in the calculator above.

Tips for this gift

Roll the paper around the tube so that the seam sits in a straight line, tape the edge with double-sided tape, and then gather each end into a neat pleat before tying with string or ribbon.

A very tall tube such as a poster tube needs paper that runs the length of the tube, so a narrow roll can still wrap it, as long as the paper is long enough to go around.

Frequently asked questions

How much wrapping paper do I need for a cylinder gift?

A cylinder gift of about 10 cm across and 30 cm tall (3 7/8 in across and 11 3/4 in tall) needs a piece of wrapping paper about 42 × 35.5 cm (16 3/4 × 14 1/2 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

Do the ends of a cylinder need extra paper?

Yes, because the paper gathers at the ends. The calculator adds the diameter once to the height plus the tuck margin, enough to pleat or twist both ends closed. Fancier finishes, like a flat circular cap, need extra circles of paper that you cut separately.

How do you calculate wrapping paper for a box?

Paper width around the box is 2 × (width + height) plus a seam overlap of about 2 cm and a tuck of about 1 cm at each end. The other dimension is the length plus the height plus the tucks. Round both up slightly, and make sure one of them fits your roll width.

What is the waste buffer for?

The waste buffer adds a percentage, 10% by default, to the total paper for several gifts. It covers crooked cuts, torn corners and offcuts too short to reuse. A confident wrapper with plain paper might use 5%, and a beginner or someone using expensive paper might choose 15% or more.

What if my gift is too wide for the roll?

The calculator tells you the minimum roll width needed and suggests two overlapping pieces. Turn the paper both ways first, since either direction may fit. If it truly cannot fit, use a wider roll, cover the top and bottom halves separately, or hide the join under a wide ribbon or a strip of matching paper.

How much ribbon do I need for a gift?

A single band around the box needs 2 × (width + height) of ribbon, and a cross wrap needs 2 × length + 2 × width + 4 × height. Add 40 cm (16 inches) for the bow, which you can change. A 30 × 20 × 10 cm box takes 100 cm for a band with a bow, or 180 cm for a cross.

Related guides and tools