Skip to content
FreeToolsNexus
Converters & Calculators

Wrapping Paper for a Book

A hardback book of about 24 × 16 × 3 cm (9 1/2 × 6 1/4 × 1 1/8 in) needs a piece of wrapping paper about 42 × 29 cm (17 × 11 3/4 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

Everything is calculated in your browser. Results update as you type. Sizes are approximate; wrap a test piece before cutting expensive paper.

Seam, tuck, pattern, waste and bow settings

Pattern allowance adds a percentage to the cut length so a printed design can line up (try 10 for patterned paper, 0 for plain). The waste buffer applies to totals for several gifts. This calculator uses the standard wrap only, not the diagonal wrap.

Wrapping more than one size? (boxes only)

Use it like an app on your phone

Open this page in your phone's browser and use the browser menu's "Add to Home Screen" option to keep a shortcut. It opens in the browser as normal and still needs a connection to load; this site does not install anything or work offline.

Books are thin, so they need less paper than almost any other gift, and one roll wraps several. The figures assume a hardback of about 24 × 16 × 3 cm. A pocket paperback will need a smaller piece, and a coffee-table book much more.

Quick reference: hardback book

MeasureMetricInches
Assumed gift size24 × 16 × 3 cm9 1/2 × 6 1/4 × 1 1/8 in
Paper to cut (across × along the roll)42 × 29 cm17 × 11 3/4 in
Ribbon: band with bow78 cm31 in
Ribbon: cross wrap with bow132 cm52 1/4 in

Pieces use a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks, fitted to a 70 cm or 30 in roll. Change any setting in the calculator above.

Tips for this gift

Measure the book with its dust jacket on. The jacket flaps add a little thickness, and the paper has to cover the spine, which is the part most likely to show a crease.

A book is rigid and square, which makes it the best item for practicing sharp corners. Fold the end flaps toward the center, crease firmly with a ruler edge, and tape inside the fold.

Frequently asked questions

How much wrapping paper do I need for a hardback book?

A hardback book of about 24 × 16 × 3 cm (9 1/2 × 6 1/4 × 1 1/8 in) needs a piece of wrapping paper about 42 × 29 cm (17 × 11 3/4 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.

Does a paperback need less paper than a hardback?

Yes. A typical paperback is about 20 × 13 × 2.5 cm, so it needs a piece roughly 35 × 24.5 cm, compared with about 42 × 29 cm for a 24 × 16 × 3 cm hardback. Thickness matters because the paper also wraps around the spine and edges, so measure the spine.

How do you calculate wrapping paper for a box?

Paper width around the box is 2 × (width + height) plus a seam overlap of about 2 cm and a tuck of about 1 cm at each end. The other dimension is the length plus the height plus the tucks. Round both up slightly, and make sure one of them fits your roll width.

What is the waste buffer for?

The waste buffer adds a percentage, 10% by default, to the total paper for several gifts. It covers crooked cuts, torn corners and offcuts too short to reuse. A confident wrapper with plain paper might use 5%, and a beginner or someone using expensive paper might choose 15% or more.

What if my gift is too wide for the roll?

The calculator tells you the minimum roll width needed and suggests two overlapping pieces. Turn the paper both ways first, since either direction may fit. If it truly cannot fit, use a wider roll, cover the top and bottom halves separately, or hide the join under a wide ribbon or a strip of matching paper.

How much ribbon do I need for a gift?

A single band around the box needs 2 × (width + height) of ribbon, and a cross wrap needs 2 × length + 2 × width + 4 × height. Add 40 cm (16 inches) for the bow, which you can change. A 30 × 20 × 10 cm box takes 100 cm for a band with a bow, or 180 cm for a cross.

Related guides and tools