Wrapping Paper Calculator in cm
A standard shoe box of about 33 × 20 × 12 cm (13 × 7 7/8 × 4 3/4 in) needs a piece of wrapping paper about 68 × 47 cm (27 1/4 × 18 3/4 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.
Everything is calculated in your browser. Results update as you type. Sizes are approximate; wrap a test piece before cutting expensive paper.
Seam, tuck, pattern, waste and bow settings
Pattern allowance adds a percentage to the cut length so a printed design can line up (try 10 for patterned paper, 0 for plain). The waste buffer applies to totals for several gifts. This calculator uses the standard wrap only, not the diagonal wrap.
Wrapping more than one size? (boxes only)
Use it like an app on your phone
Open this page in your phone's browser and use the browser menu's "Add to Home Screen" option to keep a shortcut. It opens in the browser as normal and still needs a connection to load; this site does not install anything or work offline.
This version opens in centimeters, which suits roll sizes labeled in cm and m such as 50 cm × 3 m or 70 cm × 2 m. Measure the gift with a flexible tape, enter the length, width and height, and the piece to cut appears at once.
Quick reference: shoe box
| Measure | Metric | Inches |
|---|---|---|
| Assumed gift size | 33 × 20 × 12 cm | 13 × 7 7/8 × 4 3/4 in |
| Paper to cut (across × along the roll) | 68 × 47 cm | 27 1/4 × 18 3/4 in |
| Ribbon: band with bow | 104 cm | 41 1/4 in |
| Ribbon: cross wrap with bow | 194 cm | 76 3/4 in |
Pieces use a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks, fitted to a 70 cm or 30 in roll. Change any setting in the calculator above.
Tips for this gift
Metric rolls are sold by width and length in meters, so check the width printed on the label before cutting. A 70 cm roll covers any gift whose piece is 70 cm or less in one direction, which includes most shoe boxes, books and toy boxes, while a 50 cm roll suits books and smaller boxes.
Round every cut up to the next half centimeter, as this calculator does. Marking the paper in 0.5 cm steps with a ruler is quick, and the small extra margin protects against a crooked cut.
Frequently asked questions
How much wrapping paper do I need for a standard shoe box?
A standard shoe box of about 33 × 20 × 12 cm (13 × 7 7/8 × 4 3/4 in) needs a piece of wrapping paper about 68 × 47 cm (27 1/4 × 18 3/4 in), allowing a 2 cm (1 in) seam overlap and 1 cm (0.5 in) tucks.
What size wrapping paper do I need in centimeters?
Add the length and height of the box plus 2 cm for tucks to get the paper width, and add twice the width and height plus 4 cm for seam and tucks to get the other dimension. The calculator does this for you, rounds up to 0.5 cm, and tells you which way to turn the paper.
How do you calculate wrapping paper for a box?
Paper width around the box is 2 × (width + height) plus a seam overlap of about 2 cm and a tuck of about 1 cm at each end. The other dimension is the length plus the height plus the tucks. Round both up slightly, and make sure one of them fits your roll width.
What is the waste buffer for?
The waste buffer adds a percentage, 10% by default, to the total paper for several gifts. It covers crooked cuts, torn corners and offcuts too short to reuse. A confident wrapper with plain paper might use 5%, and a beginner or someone using expensive paper might choose 15% or more.
What if my gift is too wide for the roll?
The calculator tells you the minimum roll width needed and suggests two overlapping pieces. Turn the paper both ways first, since either direction may fit. If it truly cannot fit, use a wider roll, cover the top and bottom halves separately, or hide the join under a wide ribbon or a strip of matching paper.
How much ribbon do I need for a gift?
A single band around the box needs 2 × (width + height) of ribbon, and a cross wrap needs 2 × length + 2 × width + 4 × height. Add 40 cm (16 inches) for the bow, which you can change. A 30 × 20 × 10 cm box takes 100 cm for a band with a bow, or 180 cm for a cross.