Bangle Size Calculator
Measure around your knuckles and get your bangle size, such as 2.4 or 2.6, with the exact mm, cm and inch values. Everything runs in your browser.
Wrap a soft tape around your knuckles with your thumb and little finger tucked together. Enter the number.
Measure straight across the inside of a bangle that already fits you, from inner edge to inner edge.
Step 1: match the card
Hold a standard bank card (85.6 mm wide) flat against the screen. Drag the slider until the dashed outline is exactly as wide as the card.
Step 2: compare your bangle
Rest a bangle flat on the screen and see which circle matches its inside edge. The highlighted circle is the size you pick below.
Accuracy depends on your screen and browser zoom. Change the zoom and you must calibrate again. Nothing is saved. Measuring a bangle you own (the second tab) is more reliable.
What is the bangle size calculator?
The bangle size calculator turns a measurement into a standard Indian bangle size, from 2.0 to 3.0. You can enter the circumference of your hand around the knuckles, the inner diameter of a bangle that already fits, or use the on-screen sizer with a bank card. It is meant for people buying chooriyan, kangan and kadas in India, Pakistan, the UK and the US, where sizes are quoted in inches and sixteenths.
How it works
For your hand, the calculator divides the circumference by pi to get the diameter the bangle must clear, then picks the smallest size whose inner diameter is the same or larger. It always rounds up. For a bangle you own, it picks the nearest size and shows the difference in mm. Size values come from the inch standard, where 2.N means 2 and N/16 inches, and mm is inches times 25.4. Results outside 2.0 to 3.0 show the nearest size with a warning.
Worked example
Your knuckles measure 17.9 cm around with the thumb and little finger tucked together. 17.9 divided by pi is about 5.70 cm, or 56.98 mm. The 2.4 size is 57.15 mm inside, which is the first size at least that wide, so your size is 2.4. At 18.0 cm you need 57.30 mm, which is just over 2.4, so the answer moves up to 2.6. Both results also show the next size up and down.
How to measure your hand
- Use a soft tape measure, or a strip of paper or string if you do not have one.
- Tuck your thumb against your little finger so your hand is as narrow as it can be.
- Wrap the tape around the widest part of your hand, across the knuckles. Keep it flat and snug, not tight.
- Read where the tape meets the start. If you used paper or string, mark it and measure it against a ruler.
- Enter the number in the calculator, choosing cm or inches. Measure twice and use the larger number.
Bangle size chart: 2.0 to 3.0
Sizes are inner diameters. Circumference is the distance around the inside edge. "Fits hands of" is the knuckle circumference each size is meant for.
| Size | Inches | mm | cm | Inner circumference | Fits hands of |
|---|---|---|---|---|---|
| 2.0 | 2" (2.000") | 50.8 | 5.08 | 159.6 mm / 16.0 cm | up to 16.0 cm |
| 2.2 | 2 1/8" (2.125") | 54.0 | 5.40 | 169.6 mm / 17.0 cm | 16.0 to 17.0 cm |
| 2.4 | 2 1/4" (2.250") | 57.2 | 5.72 | 179.5 mm / 18.0 cm | 17.0 to 18.0 cm |
| 2.6 | 2 3/8" (2.375") | 60.3 | 6.03 | 189.5 mm / 19.0 cm | 18.0 to 19.0 cm |
| 2.8 | 2 1/2" (2.500") | 63.5 | 6.35 | 199.5 mm / 19.9 cm | 19.0 to 19.9 cm |
| 2.10 | 2 5/8" (2.625") | 66.7 | 6.67 | 209.5 mm / 20.9 cm | 19.9 to 20.9 cm |
| 2.12 | 2 3/4" (2.750") | 69.9 | 6.99 | 219.4 mm / 21.9 cm | 20.9 to 21.9 cm |
| 2.14 | 2 7/8" (2.875") | 73.0 | 7.30 | 229.4 mm / 22.9 cm | 21.9 to 22.9 cm |
| 3.0 | 3" (3.000") | 76.2 | 7.62 | 239.4 mm / 23.9 cm | 22.9 to 23.9 cm |
What does 2.4, 2.6 or 2.8 mean?
The number after the dot counts sixteenths of an inch above 2 inches. A 2.4 is 2 and 4/16 inches, which is 2 1/4 inches. A 2.6 is 2 3/8 inches. A 2.8 is 2 1/2 inches. Each step adds 1/8 inch, or about 3.2 mm.
So 2.10 is not 2.1. It is 2 and 10/16 inches, and it comes after 2.8. The scale then runs 2.12, 2.14 and 3.0. Look up a single size: 2.2, 2.4, 2.6, 2.8, 2.10, 2.12.
How we calculate
A bangle has to pass over your hand, so the inside of the bangle must be at least as wide as your knuckles. We turn your measurement into a diameter: diameter = circumference ÷ π. Then we pick the smallest standard size whose inner diameter is the same or larger. We always round up.
Size values come from the inch standard: inner diameter in inches = 2 + N/16 for the label 2.N, and mm = inches × 25.4. Full precision is kept in the calculation. We round only what you see. Some jewellers print slightly different mm values for the same label, so a shop's chart may differ from ours by a millimetre or so.
For a bangle you own, we pick the size with the smallest difference from your measurement. Values outside 2.0 to 3.0 show the nearest size with a warning. Last updated: 2026-11-11.
Common mistakes
- Measuring the wrist. The bangle has to clear your knuckles. Your wrist is usually narrower.
- Letting the tape go loose. A slack tape reads high and gives you a size that is too big.
- Not tucking the thumb. Measure with your thumb folded against your little finger, as when you slide a bangle on.
- Choosing the smaller size for a closed bangle. Only openable, hinged and screw-type bangles can go smaller. A closed bangle must fit over your hand.
- Reading 2.10 as 2.1. See the chart above.
Need to switch between inches and centimetres? Use the unit converter.
Frequently asked questions
How do I find my bangle size?
Tuck your thumb against your little finger and wrap a soft tape around your knuckles. Enter that number in the calculator. It divides by pi to get the diameter your hand needs and picks the smallest standard size that is as wide or wider, so the bangle can pass over your hand.
What does 2.4, 2.6 or 2.8 mean?
The number after the dot counts sixteenths of an inch above 2 inches. A 2.4 is 2 and 4/16 inches, or 2 1/4 inches. A 2.6 is 2 3/8 inches and a 2.8 is 2 1/2 inches. Each step is 1/8 inch, about 3.2 mm, of inner diameter.
Should I measure my wrist or my knuckles?
Measure your knuckles. A closed bangle has to pass over the widest part of your hand, which is usually wider than your wrist. A bangle sized to the wrist will often not go on at all. Use the wrist only as a check for how loose the bangle will sit.
Which size should I choose if I am between two sizes?
For a closed bangle, choose the larger size. A slightly loose bangle is easier to wear than one that will not slide over your hand. For openable, hinged or screw-type bangles you can often pick the smaller one, since they do not pass over the knuckles.
Is 2.10 the same as 2.1?
No. The label 2.10 means 2 and 10/16 inches, which is 2 5/8 inches or about 66.7 mm. It comes after 2.8 on the scale. There is no standard size 2.1. If a seller lists one, ask for the inner diameter in mm before you buy.
How accurate is the on-screen sizer?
It is a rough guide. It sets the scale from a bank card you hold against the screen, so accuracy depends on your screen and your browser zoom. Change the zoom and you must calibrate again. Measuring a bangle you own is more reliable than the on-screen sizer.
Why does my jeweller's chart show different mm values?
Some jewellers print slightly different mm values for the same label. Ours come straight from the inch standard, where mm equals inches times 25.4, with no rounding until display. A difference of about a millimetre between charts is normal. Check how your jeweller measures before you order.
Are my measurements stored or sent anywhere?
No. The calculation runs in your browser, and nothing you enter is sent, saved or tracked. The on-screen sizer does not keep its calibration either, so you start fresh each visit. Reloading the page clears every value you typed.
Related tools
- Free Online Graphing Calculator Evaluate scientific expressions, graph functions, trace coordinates and compare values in a free browser-based graphing and scientific calculator.
- Currency Converter Convert between 40 currencies, including PKR, SAR, AED and QAR, using indicative rates you can edit yourself.
- Unit Converter Convert inch to cm, inches to cm, kg to lbs, pounds to kg, or miles to km, alongside everyday metric and imperial measurements.
- Watts, Amps & Volts Calculator Calculate watts, amps or volts for single-phase and three-phase circuits, with power factor and kW to kVA.
- Solar Panel Calculator Estimate panel count, solar array and inverter size, optional battery capacity, roof area and yearly generation from a bill or appliance list.
- Cups to Grams Converter by Ingredient Pick an ingredient, enter cups, spoons, fluid ounces or milliliters, and get grams, ounces, pounds and kilograms instantly, or swap to convert grams back to cups.
- Cake Pan Converter Choose the pan in the recipe and the pan you have to get a clear recipe amount, fill check and bake-time suggestion.
- Cake Servings Calculator Choose a cake size, layers and slice style to see how many party and wedding servings it cuts, with a slice diagram and tier planner for a guest count.
- Gift Wrapping Paper Calculator Enter a gift's size to get the exact piece of wrapping paper to cut, how many gifts a roll wraps, how many rolls to buy for a pile of presents, and the ribbon you need.