Skip to content
FreeToolsNexus
Converters & Calculators

Cake Pan Converter

Choose the pan in the recipe and the pan you have to get a clear recipe amount, fill check and bake-time suggestion.

Pan in the recipe
Pan you have

Many 9-inch pans are only 1.5 in deep. Use Custom size if yours is different.

Want to adjust bake time or scale ingredients? (optional)

Use amounts such as 1/2 tsp, 1-2 cups, a pinch, or 1 (14 oz) can.

How to use it

1. Pick the pan in the recipe and enter how many.

2. Pick the pan you have and enter how many.

3. Read the recipe amount, pan-fill message and bake-time suggestion.

Worked example

For a recipe written for one 9-inch round pan, choose that pan and then choose a 9x13 cake pan. The calculator says to multiply the recipe by about 1.8. For example, 2 cups of flour becomes about 3 2/3 cups. Start checking the cake at about 75 percent of the recipe's bake time.

Cake pan size and capacity chart

Capacity is the volume of water the pan holds to the brim. Typical batter is about half of that, or two thirds for bundt, tube and sheet pans. Shaped pans use nominal capacities.

Pan Capacity (cups) Capacity (ml) Top area (sq in) Typical batter (cups)
6-inch round (2 in deep) 3.9 927 28 2.0
7-inch round (2 in deep) 5.3 1,261 38 2.7
8-inch round (2 in deep) 7.0 1,647 50 3.5
9-inch round (2 in deep) 8.8 2,085 64 4.4
10-inch round (2 in deep) 10.9 2,574 79 5.4
12-inch round (2 in deep) 15.7 3,707 113 7.8
8x8-inch square (2 in deep) 8.9 2,098 64 4.4
9x9-inch square (2 in deep) 11.2 2,655 81 5.6
9x13 cake pan (2 in deep) 16.2 3,835 117 8.1
11x15-inch pan (2 in deep) 22.9 5,408 165 11.4
Quarter sheet pan (9x13, 1 in deep) 8.1 1,917 117 5.4
Half sheet pan (18x13, 1 in deep) 16.2 3,835 234 10.8
9x5-inch loaf pan (3 in deep) 8.0 1,893 38 4.0
8.5x4.5-inch loaf pan (2.5 in deep) 6.0 1,420 35 3.0
Mini loaf pan (about 6x3, 2 in deep) 2.0 473 14 1.0
6-cup bundt pan 6.0 1,420 25 4.0
10-cup bundt pan 10.0 2,366 41 6.7
12-cup bundt pan 12.0 2,839 49 8.0
10-inch tube / angel food pan 16.0 3,785 58 10.7
8-inch heart pan (2 in deep) 6.0 1,420 43 3.0
9-inch heart pan (2 in deep) 7.5 1,774 54 3.8
12-cup muffin tin 6.0 1,420 69 4.0

Equivalent cake pans

These swaps hold about the same amount of batter, so the recipe can usually stay the same. Open a page for the full scale and bake time notes.

Recipe panUse insteadDetails
9-inch round8-inch square, 9x5 loaf (taller)9-inch round to 8-inch square
9x13 panTwo 8-inch rounds (about 86% of the batter)9x13 to two 8-inch rounds
12-cup bundt9x13 pan12-cup bundt to 9x13
9x13 pan24 standard cupcakesCake to cupcakes

Bake time by pan, depth and material

SituationBake timeTemperature
Thinner batter than the originalStart checking at about 75% of the timeSame
Similar depthSame time, check 5 minutes earlySame
Deeper batter110 to 125% of the timeLower by 25°F (15°C) if it browns early
Dark metal or nonstick panCheck earlyLower by 25°F (15°C)
Glass or ceramic dishCheck earlyLower by 25°F (15°C)
Cupcakes18 to 22 minutes350°F (175°C)

Ovens vary, so doneness tests beat the clock: a toothpick with a few moist crumbs, and a surface that springs back.

Pan substitutions that work

  • Round to square: choose a square one inch smaller than the round's diameter, such as 8-inch square for a 9-inch round.
  • Layers to sheet: one 9x13 holds about the same as two 8-inch rounds, but bakes a thinner single layer.
  • Loaf to cake: a 9x5 loaf takes about the batter of one 9-inch round, but needs more time because it is deeper.
  • Cake to cupcakes: fill liners about two thirds full for roughly 24 cupcakes from a 9x13 recipe.

Common mistakes when changing pans

  • Measure both width and depth; use Custom size if the preset does not match your pan.
  • Leave out extra batter or bake it separately if the pan would be more than two-thirds full.
  • Start checking earlier for a thinner cake and later for a deeper cake; test the center before removing it.
  • Measure partial eggs as beaten egg instead of rounding to a whole egg.
  • Lower the oven by about 25°F (15°C) for dark metal, glass or ceramic pans.

Sources and accuracy

Method: geometry uses the dimensions you enter; bundt, tube, loaf and heart pans use nominal capacities.

Related baking tools

Cake pan conversions

Frequently asked questions

How do I convert a cake recipe from one pan size to another?

Choose the pan named in the recipe and the pan you have. The calculator tells you how much of the recipe to make; multiply each ingredient by that amount and use beaten egg for partial eggs. Check the center with a toothpick before removing the cake.

How do I calculate the volume of a cake pan?

For a round pan, multiply 3.14 by the radius squared, then by the depth. For a square or rectangular pan, multiply length by width by depth. The result is in cubic inches; divide by 14.44 to get US cups. Bundt and tube pans are hard to measure, so printed or water-measured capacity is more reliable.

What size pan is equal to a 9-inch round cake pan?

An 8-inch square pan is the closest match, and both take about the same amount of batter. A 9-inch round is also close to a 9x5 loaf pan for batter volume if you accept a taller, narrower cake, and about half of a 9x13 pan. Always check the depth, because 1.5-inch pans hold less.

Can I bake a 9-inch round cake recipe in a 9x13 pan?

Yes, but you need about 1.8 times the recipe, because a 9x13 pan holds far more batter than one 9-inch round. Using the recipe unscaled would fill the pan only about a quarter full and give a thin, dry cake. The converter shows the scale factor and warns if the fill level is too low.

How many cups of batter fit in a cake pan?

Fill most cake pans about half full, which for a 9-inch round that is 2 inches deep is roughly 4 1/2 cups of batter. An 8-inch square takes about 4 1/2 cups, a 9x13 about 8 cups, and a 12-cup bundt about 8 cups, since bundts can be filled two thirds. Exact amounts depend on the recipe's rise.

How full should I fill a cake pan?

Between one half and two thirds full is the safe range for most cakes. Above two thirds, batter risks overflowing as it rises, especially with baking powder or whipped egg whites. Below one third, the cake bakes thin and dry. The converter flags both cases and tells you how full the pan will be with the recipe as written.

How do I change the bake time when I change pan size?

A thinner cake can finish sooner, so start checking it at about 75 percent of the recipe's bake time. A deeper cake may need 110 to 125 percent of the time. Check the center with a toothpick before taking it out.

Should I change the oven temperature for a different pan?

Usually you keep the temperature the same, except for deep pans, large cakes, dark metal pans and glass dishes. Reduce the temperature by 25°F, or 15°C, for dark nonstick pans and glass bakeware, because they absorb more heat and over-brown the edges. For very deep batter, lower by 25°F and bake longer.

How do I scale eggs when converting a cake recipe?

Multiply the eggs by the scale factor. If the result is not a whole number, use whole eggs plus beaten egg: one large egg is about 3 tablespoons, so 2.5 eggs is 2 eggs plus 1 1/2 tablespoons of beaten egg. You can also weigh the beaten egg, where one large egg is about 50 grams without the shell.

Can I use a bundt pan instead of a regular cake pan?

Yes, if you match volume. A 12-cup bundt holds about as much batter as a 9x13 pan, and a 10-cup bundt about as much as one and a half 9-inch round recipes. Grease and flour a bundt pan thoroughly, then bake at the same temperature for longer, often 10 to 20 minutes more, checking the thickest part.

Do glass and dark metal pans change baking?

They do. Glass and ceramic dishes conduct heat slowly but retain it, and dark metal pans absorb more heat than shiny aluminum. Both brown edges faster, so lower the oven by 25°F, or 15°C, and check the cake early. Light aluminum pans bake most evenly, which is why most recipes assume them.

What if my pan is too small for the batter?

Use less batter or a bigger pan so the cake has room to rise. You can bake extra batter in cupcake liners; start checking the cupcakes after about 18 minutes. If you are unsure, place a rimmed baking sheet under the pan to catch spills, but do not use it as a substitute for leaving enough room.

What if my pan is bigger than the recipe expects?

A larger pan can make the cake thin and dry. Use a smaller pan or make more batter; if you keep the larger pan, start checking at about 75 percent of the recipe's bake time. The optional ingredient list can help you adjust the amounts, and you can bake any extra batter separately.

How do I measure a cake pan correctly?

Measure across the top, inside edge to inside edge, not including the rim, and measure depth from the bottom to the rim. A pan labeled 9 inches is not always exactly 9 inches inside, and many brands run slightly different. Use the custom size option if your pan differs from the standard preset.

Can I use inches or centimeters?

Yes. Choose centimeters to see the common centimeter pan sizes. For any other size, choose Custom size and enter the dimensions in the selected unit. The preset list still includes inch sizes, with their units shown in each label, so you can select the exact pan you use.

How many cupcakes equal one cake?

A recipe for a 9x13 cake makes about 24 standard cupcakes. A recipe for two 8-inch layers makes about 20, and two 9-inch layers about 26. One 8-inch round makes about 10. Fill each liner about two thirds full and bake for 18 to 22 minutes at 350°F, or 175°C.